Saturday, June 23, 2012

Light of My Life

We finished the dining room almost two years ago, but something kept nagging me. You can see it photobombing my dining room before shot with the faded-safety-vest orange walls.


It's the basic, "traditional style" light fixture. I suppose it is an ok fixture- provides light, probably pretty cheap too. But it didn't seem to be the right style for the room, or this house.

So I've wanted to find a light that would update the room with something simple and solid, like a bungalow. However, I lacked any opinion whatsoever. I would look at light after light and each looked fine, hideous or ok. Nothing wowed me.

Until this morning, when I was shopping for shingles. I wanted to take a quick peak at lighting, just in case there would be a good deal on something for my parents' house. I didn't know I was about the meet the first light I would get excited about.


I thought this light looked very cool, but why was it just sitting on the shelf, with no box? Shouldn't it be hanging, or in some sort of packaging? I moved in for a closer look.

Then I saw it- the deal maker.


YES! And yes, this deal is available near you: 8-Light Dark Oil-Rubbed Bronze Chandelier

I asked a store associate if there was anything wrong with the light, and he assured me there wasn't. He kindly took it to the front of the store for me, so I could continue on to ...



... what was I looking for? Oh yea, shingles.

I've never replaced a hardwired light fixture, and I admit I was intimidated. But I turned off the power, grabbed heavy rubber gloves and rubber sandals, and learned as I went. I pretty much just looked for things that would slide apart and untwist. The old light came down easily.

The new light had a five foot long chain and is 2-feet long already. That's way too much chain for our 9-foot ceilings. I had to figure out how to adjust the chain. 


The links on either end open up, but there's no way to easily adjust the length of the chair. I measured the distance I wanted the fixture from the ceiling, then measured the chain. I inserted one screw driver on either side of the link I figured should come off, and slowly increased pressure, until it twisted open.


I took the adjustable link from the end, and added it to the new, shorter chain.


 I'm saving the remaining four feet of chain just in case I decide we need to take the fixture when we build our next house.

I removed the plate at the base of the chain by removing this washer, and wrapped the extra cord inside the housing.


The light did have one small blemish- something black left a mark on the etched glass shade.


About 60 seconds with a Magic Eraser got me this far?:


So here it is- the new light!




Hope you don't mind all these pictures. I am very excited about this light!

3 comments: